Quick Installation Guide
USB2.0 1-Port Multi-Functional Printer Server
Model # AMPS230
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Connecting the Printer Server
WARNING: Only a USB printer may be connected to the USB port of the
Printer Server. Connecting any other USB device to the Printer Server may
damage the Printer Server.
Note: Before connecting the Printer Server, you must install the printer driver
on each computer you plan to use with the printer. Make sure that you are able
to print, scan, and fax from each with your multi-functional printer directly
connected to your computer(s).
Step 1 Power down the printer and the printer server.
Step 2 Connect one end of a networking cable to your router, then connect the
other end to the Ethernet port on the back of the print server.
Step 3 Connect the USB cable coming from your printer into the USB port on
the printer server.
Section 1
Ver. 1A
Package Content:
• 1-Port MFP Server
• Power Adapter
• Ethernet Cable
• Driver & Utility CD
• Quick Installation Guide
To Next Page
Need help?
General
