Need help?Do you have a question about the AirLive MD-3025 and is the answer not in the manual?
Access download links, programs, and FAQs for camera models via URLs or QR codes.
Connect SP-100E to the camera for surge protection.
Connect a 12V1A adapter or PoE switch to power the camera.
Connect the camera, PC/laptop, and switch to the router.
Configure default IP address and ensure UPnP is enabled.
Use IP Wizard to scan and locate cameras on the network.
Log in to the camera's web interface using default credentials.
Enable audio function for free voice communication between device and camera.
Use Device ID and public IP to view the camera remotely via the internet.
Access download links, programs, and FAQs for camera models via URLs or QR codes.
Connect SP-100E to the camera for surge protection.
Connect a 12V1A adapter or PoE switch to power the camera.
Connect the camera, PC/laptop, and switch to the router.
Configure default IP address and ensure UPnP is enabled.
Use IP Wizard to scan and locate cameras on the network.
Log in to the camera's web interface using default credentials.
Enable audio function for free voice communication between device and camera.
Use Device ID and public IP to view the camera remotely via the internet.
General| Brand | AirLive |
|---|---|
| Model | MD-3025 |
| Category | Security Camera |
| Language | English |
To Next Page
