Need help?Do you have a question about the AirLive WIAS-3200N and is the answer not in the manual?
Provides step-by-step instructions for the physical installation of the WIAS-3200N hardware.
Guides users on how to connect to and log into the WIAS-3200N's web-based management interface.
Explains how to set up the WAN connection, detailing Static, Dynamic, and PPPoE options.
Covers general wireless configuration parameters like band, channel, and preamble settings.
Explains how to configure wireless security profiles, including WEP, WPA-PSK, and 802.1X for zones.
Covers managing local user accounts, including adding, uploading, and downloading user lists.
Details the configuration of primary and secondary RADIUS servers for external user authentication.
Describes how to restrict network access based on MAC addresses, allowing only listed devices.
Describes how to back up system settings, restore them, or reset the device to factory defaults.
Details the process of downloading and installing new firmware for the WIAS-3200N.
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Speed | Up to 300 Mbps |
| Antenna | 2 x 5 dBi detachable antennas |
| Power Supply | 12V DC, 1A |
| USB Ports | 1 x USB 2.0 |
| Weight | 250 g |
| Ethernet Ports | 1 x 10/100 Mbps WAN, 4 x 10/100 Mbps LAN |
| Operating Modes | Access Point, Router, Client |
| Security | WEP, WPA, WPA2 |
| Operating System | Linux-based |
To Next Page