Do you have a question about the AirLive WN-350R and is the answer not in the manual?
Overview of the wireless router and initial safety guidelines.
Detailed safety instructions for router installation and use.
Lists the necessary hardware and software for router operation.
Details the items included in the router's package.
Description of the router's front and back panel components and LEDs.
Steps to connect the DSL/cable modem to the wireless router.
Instructions for accessing the router's web interface.
Configure IP address for Windows 95/98/Me for router access.
Configure IP address for Windows 2000 for router access.
Configure IP address for Windows XP for router access.
Configure IP address for Windows Vista for router access.
Method to find the router's IP address after setup.
Step-by-step guide for initial internet connection setup.
Procedure for configuring the router for Cable Modem connection.
Procedure for configuring the router for Fixed-IP xDSL connection.
Procedure for configuring the router for PPPoE xDSL connection.
Procedure for configuring the router for PPTP xDSL connection.
Procedure for configuring the router for L2TP xDSL connection.
Procedure for configuring the router for Telstra Big Pond connection.
Configure essential router settings like time and password.
Set the router's time zone and enable automatic time updates.
Steps to change the default router administrator password.
Configure remote access to the router's management interface.
Configure various WAN connection types for internet access.
Configure router for Dynamic IP internet connection.
Configure router for Static IP internet connection.
Configure router for PPPoE internet connection.
Configure router for PPTP internet connection.
Configure router for L2TP internet connection.
Configure router for Telstra Big Pond connection.
Configure DNS server addresses for internet resolution.
Configure Dynamic DNS for remote access using hostnames.
Configure router for Wireless ISP (WISP) mode.
Settings for wired network connections via LAN ports.
Configure the router's local IP address and subnet mask.
Configure the DHCP server for automatic IP assignment.
Assign static IP addresses to specific devices.
Settings for enabling and configuring wireless network.
Configure SSID, band, and operation modes for wireless.
Configure the router to operate as a wireless Access Point.
Configure router as a wireless station to connect to an AP.
Connect two wireless routers in Point-to-Point bridge mode.
Connect router to multiple APs for expanded wireless network.
Expand network scope by combining up to four APs with WDS.
Configure router as a wireless repeater to extend coverage.
Fine-tune wireless radio parameters for optimal performance.
Secure the wireless network using encryption methods.
Disable all wireless encryption and security measures.
Configure Wired Equivalent Privacy (WEP) encryption.
Configure Wi-Fi Protected Access (WPA) encryption.
Configure wireless authentication using a RADIUS server.
Filter wireless devices by MAC address for network access.
Easily connect wireless devices using WPS button or PIN.
Recommendations for enhancing wireless network security.
Tools for managing and optimizing network performance.
Set Quality of Service parameters for bandwidth management.
Create custom rules for Quality of Service.
Manage IP addresses and network traffic for internet sharing.
Enable or disable the NAT functionality on the router.
Redirect incoming network ports to specific local devices.
Configure virtual servers to expose services on the local network.
Configure port mapping for applications requiring multiple connections.
Enable or disable Universal Plug and Play for automatic network configuration.
Configure Application Layer Gateway settings for specific applications.
Implement firewall rules to protect the local network.
Control network access based on MAC address, IP, protocol, or port.
Block access to specific websites or keywords.
Configure settings to prevent Denial of Service attacks.
Fine-tune DoS attack prevention thresholds and parameters.
Configure DMZ to expose specific devices to the internet.
View current status and information about the router.
Display router model, firmware version, and hardware details.
Monitor the status of the current internet connection.
View the current configuration and status of router components.
Review system events and operational logs.
View logs related to network and system security events.
List of devices currently assigned IP addresses by DHCP.
View network traffic statistics for wireless, LAN, and WAN interfaces.
Backup and restore router configurations for safety.
Update the router's system software (firmware).
Reset router settings to factory defaults.
Technical specifications of the router's hardware components.
Solutions for common router problems and connectivity issues.
Definitions of common networking and router terminology.
| Ethernet LAN | Yes |
|---|---|
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| Bandwidth | 2.4 GHz |
| Frequency range | 2.4000 - 2.4835 GHz |
| xDSL connection | No |
| Dimensions (WxDxH) | 157 x 127 x 30 mm |
| Output power description | 5V DC, 1A |
| WLAN data transfer rates supported | 1, 2, 5.5, 6, 11, 12, 24, 36, 48, 54, 150, 300 Mbit/s |
| Antennas quantity | 2 |
| Web-based management | - |
| Ethernet LAN (RJ-45) ports | 5 |
| Flash memory | 2 MB |
| Certification | CE, FCC |
| Internal memory | 16 MB |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package depth | 228 mm |
| Package width | 277 mm |
| Package height | 67 mm |
| Package weight | 620 g |
| Product color | White |
| Weight | - g |
|---|