To Next PageTo Next Page
Need help?Do you have a question about the Airmark GFW SERIES and is the answer not in the manual?
Explains hazard symbols (WARNING, CAUTION) and their implications for injury or damage.
Covers technician qualifications, power safety, code compliance, ventilation, and installation restrictions.
Details reading instructions, gathering tools, clearance requirements, and drain line setup.
Emphasizes selecting the correct unit size and compatibility with the outdoor unit tonnage.
Guides piston selection based on outdoor unit capacity and provides a sizing chart.
Provides detailed steps for changing the flowrator piston, including safety precautions.
Advises protecting the TXV body and sensing bulb from heat during brazing.
Details recommended horizontal and vertical mounting positions for the TXV sensing bulb.
Provides a step-by-step guide for installing expansion valves, including removing old parts.
Covers power supply voltage, wiring standards, and compatibility with copper/aluminum.
Provides step-by-step instructions for purging air from the hydronic system.
Covers connection to electric service, circuit breakers, and identifying cut-off devices.
General