Need help?Do you have a question about the airmaster AM 500 and is the answer not in the manual?
Manual reading, manufacturer rights, risk warnings, and usage restrictions for the unit.
Precautions for unit operation, including disconnection before access and cover installation.
Procedures for starting, putting the unit in standby, and switching it off.
How to activate and cancel the child lock feature to prevent all operation.
Overview of warning (yellow) and alarm (red) symbols shown on the control panel.
Detailed causes and actions for yellow warnings, allowing continued operation.
Detailed causes and actions for red alarms, which stop unit operation.
Functionality and activation of the automatic operating lock for the Orbit panel.
Instructions on how to manually adjust air flow using the Airlinq Orbit touch screen.
Instructions for switching the unit off using the operating menu.
Description of automatic operation modes for the Airlinq Orbit.
Steps for starting, restarting, and placing the unit in standby via the menu.
Description of timer-controlled ventilation and night time cooling programs.
How to adjust, add, or remove timer programs for ventilation.
Using the startup guide for initial unit setup and configuration.
Activating and deactivating the screen lock feature for security.
How to reset the service timer after maintenance.
How to select specific groups or individual units within the BMS.
Procedures for controlling the operation of selected groups or units.
How warning and alarm indicators are displayed on the Orbit panel.
Specific causes and implications of yellow warnings.
Specific causes and implications of red alarms.
Common error descriptions and basic troubleshooting steps for unit issues.
Manual reading, manufacturer rights, risk warnings, and usage restrictions for the unit.
Precautions for unit operation, including disconnection before access and cover installation.
Procedures for starting, putting the unit in standby, and switching it off.
How to activate and cancel the child lock feature to prevent all operation.
Overview of warning (yellow) and alarm (red) symbols shown on the control panel.
Detailed causes and actions for yellow warnings, allowing continued operation.
Detailed causes and actions for red alarms, which stop unit operation.
Functionality and activation of the automatic operating lock for the Orbit panel.
Instructions on how to manually adjust air flow using the Airlinq Orbit touch screen.
Instructions for switching the unit off using the operating menu.
Description of automatic operation modes for the Airlinq Orbit.
Steps for starting, restarting, and placing the unit in standby via the menu.
Description of timer-controlled ventilation and night time cooling programs.
How to adjust, add, or remove timer programs for ventilation.
Using the startup guide for initial unit setup and configuration.
Activating and deactivating the screen lock feature for security.
How to reset the service timer after maintenance.
How to select specific groups or individual units within the BMS.
Procedures for controlling the operation of selected groups or units.
How warning and alarm indicators are displayed on the Orbit panel.
Specific causes and implications of yellow warnings.
Specific causes and implications of red alarms.
Common error descriptions and basic troubleshooting steps for unit issues.
General| Brand | airmaster |
|---|---|
| Model | AM 500 |
| Category | Air Conditioner |
| Language | English |
To Next Page
