airo COMFORT AC08MWS - User Manual

Questions and Answers

B
bauerdavidAug 4, 2025
Why is my airo COMFORT Air Conditioner not cool enough?
- J
  James DelacruzAug 4, 2025
  If your airo COMFORT Air Conditioner isn't cooling effectively, several factors could be the cause. First, ensure that all doors and windows are properly closed to prevent warm air from entering. Eliminate any heat sources within the room that could be contributing to the problem. Check that the vent tube is correctly connected and free from obstructions. Also, verify that the temperature setting isn't set too high; adjust it to a cooler setting if needed. Lastly, make sure the air inlet is clean and not blocked by any obstructions.
A
arroyovanessaAug 9, 2025
How to fix E2 code on airo COMFORT AC08MWS?
- A
  anthonyrichardAug 10, 2025
  The E2 code on your airo COMFORT Air Conditioner indicates that the water tank is full during cooling. To resolve this, remove the rubber stopper and empty the water from the tank.
K
kayla12Aug 14, 2025
What does E4 code mean on airo COMFORT Air Conditioner?
- M
  Michael SanfordAug 14, 2025
  The E4 code on your airo COMFORT Air Conditioner means the water tank is full during heating. Please empty the water tank.
M
Michael BrownAug 19, 2025
What does E0 code mean on airo COMFORT AC08MWS Air Conditioner?
- R
  Robert FreemanAug 20, 2025
  The E0 code on your airo COMFORT Air Conditioner indicates that the room temperature sensor has failed. You can replace the room temperature sensor; the unit can also function without replacing it.
C
chadrodgersAug 25, 2025
How to fix E1 code on airo COMFORT Air Conditioner?
- T
  Tammy ScottAug 25, 2025
  The E1 code on your airo COMFORT Air Conditioner indicates a failure of the condenser temperature sensor. Replace the condenser temperature sensor to resolve this issue.
G
George PopeAug 29, 2025
What does E3 code mean on airo COMFORT Air Conditioner?
- N
  Nicole SmithAug 30, 2025
  The E3 code on your airo COMFORT Air Conditioner indicates that the evaporator temperature sensor has failed. Replace the evaporator temperature sensor to resolve this issue.