Airpura R600 - User Manual

Replace the
4 screws and
tighten
Turn the
Airpura
back onto
it's casters
Replace the
gasket
To close the filter chamber
Position the
indentation
in the cover
into the center of
the HEPA filter
Operating
& Filter Replacement
Directions
Thank You for choosing an
Airpura High Efficiency Air Purifier
To bring you the benefits of clean indoor air
To Begin Using Your Airpura...
Inspect the exterior of your Airpura to verify there is no
damage from shipping. If any damage is noted please
follow the instructions in the Airpura returns policy.
Wipe the unit with a damp cloth to remove any dust from
packaging
Plug the unit into a regular grounded 110 volt outlet
Turn on the unit to MAX and allow it to run for a few minutes
Set the variable speed control to the level you wish
The most efficient way to use your Airpura for regular air
quality maintenance is to run it at a low speed 24 hours a
day 7 days a week
Feel the difference breathing clean air makes
to your health
R600
Airpura Limited Warranty
5 years on parts and 10 years labor
See www.airpura.com for details

Summary

Airpura Limited Warranty

Airpura Operating & Filter Replacement Directions

Getting Started with Your Airpura

Initial setup, inspection, and operation of the Airpura unit.

Filter Maintenance and Replacement

Pre-Filter Care

Vacuuming and replacement schedule for the pre-filter.

Activated Carbon Filter Replacement

Guidelines for changing the activated carbon filter.

HEPA Filter Replacement

Recommendations for replacing the HEPA filter.

Filter Chamber Opening Procedure

Step-by-step instructions for opening the filter chamber.

Airpura R600 Specifications

General

Manufacturer	Airpura
Type	Air Cleaner
Filter Type	HEPA
Activated Carbon Filter	Yes
Pre-filter	Yes
Coverage Area	2000 sq. ft.
Fan Speeds	3
Voltage	120 V
Warranty	5 years
Noise Level	30-60 dB