AirSense Stratos Quadra User Manual

Iss. 29-11-02
Area 1 Protects:
Area 2 Protects:
Area 3 Protects:
Area 4 Protects:
Your Protected Areas are:
Your Fire Officer is:
Your Area/location is:
Your Emergency/assembly area is:
In line with continuous product improvement we reserve the right
to modify or update specifications without notice.
This guide outlines basic detector displays and
gives a brief indication of what to do when
the lamps illuminate.
This is not a full technical or installers manual.
Equipment may vary according to specification.
If there is any doubt please contact your supplier.
AirSense Technology Limited
71 Knowl Piece • Wilbury Way • Hitchin • Hertfordshire SG4 0TY • UK
Tel: (+44) (0)1462 440666 • Fax: (+44) (0)1462 440888
e-mail: sales@airsense.co.uk
www.airsense.co.uk./airsense
AirSense Technology Benelux BV
Graaf Florisweg 52, 2805 AM Gouda • Nederland
Tel: (+31) 1825 17078 • Fax: (+31) 1825 18771
e-mail: schakel@cistron.nl
AirSense Technology (Aust) Pty Ltd
122 Ashley Street • Underdale • S.A. 5032
P.O. Box 302 • Torrensville Plaza • S.A. 5031
Tel: (08) 8234 2525 • Fax: (08) 8443 9625
e-mail: airsense@tne.net.au

AirSense Stratos Quadra Specifications

General

Brand	AirSense
Model	Stratos Quadra
Category	Smoke Alarm
Language	English

Summary

Understanding Detector Indicators

Indicator Panel Overview

Explains the Stratos-Quadra display panel, Detection Area LEDs, and their sequential indexing for monitoring system status.

Responding to Alarm Conditions

Fire Alarm Response

Details actions to take when the red FIRE lamp illuminates, including evacuation and emergency procedures.

System Controls and Indicators

Operational Indicators Explained

Details the status lights for Air Flow, Detector, Power, and Separator, explaining normal operation and fault conditions.

Smoke Density and Alarm Levels

Describes the ten-segment bargraph for smoke density and how AUX, PRE-ALARM, and ALARM LEDs indicate preset levels.

Key Push Buttons

Explains the functions of the Reset, Test, and Isolate push buttons and their impact on detector operation.

Alarm Level Notifications

Pre-Alarm Notification

Details the response to a Pre-Alarm signal, typically involving investigation to find the source of smoke.

Auxiliary Alarm Notification

Explains the function and programming of the AUX alarm, which can act as a pre-pre-alarm or post-fire indicator.