7
Troubleshooting the Unit
Symptom Solution
No power — fan, lamp,
Check to see if the cord is plugged in and the unit
and
electron generator do
is switched on.
not function.
Check to see that outlet is working.
If the outlet is controlled by wall switch, make sure it’s on.
Fan is not working.
Check to make sure the unit is plugged in. If fan still
fails to work, call 1-866-GREAT-AIR (1-866-473-2824).
Lamp is not working.
Check the Photohydroionization
™
*
Module and
make sure it is securely screwed into place (do not
over-tighten the screw). If the lamp doesn’t work,
replace with a new Module. If the lamp still doesn’t
work, call 1-866-GREAT-AIR (1-866-473-2824).
Specifications
Operational . . . . Electron Generation Self-limiting high-voltage Electron Generator
Warranty Three-Year Limited Warranty on parts
and workmanship
Electrical . . . . . . Supply Voltage 120 VAC, 60 Hz
Power 0.5 amps/55 watts
Mechanical . . . . Dimensions 16" height x 9" diameter
Weight of Unit 7 pounds
Shipping Weight 9.6 pounds
Free Air Delivery Fan 13 CFM
Regulatory . . . . . Complies with electrical and mechanical requirements of the
UL 867 Standard. Emits ozone at or below 0.05 ppm.
*All trademarks are the property of their respective owners.
To Previous Page
Loading...