www.airssential.com.au
V1.18.06
Instruction Manual
Read the instruction manual carefully before using this device.
Keep this manual in a safe place for future reference.
!
WARNING: Keep this device away from children and the infirm,
to avoid accidents. Failure to follow the instructions may
cause inaccurate readings or damage the thermometer.
Introduction
Congratulations on the purchase of your new LifeTemp
®
Touch
Infrared Forehead Thermometer. The thermometer is simple to
use, utilises German technology and sensors to ensure high
accuracy, is rechargeable and has blue backlighting for use in
dark environments.
What Forehead Temperature is a Fever?
An exact relationship between oral, ear, armpit, rectal and
forehead temperature measurements has not yet been
determined by medical research. By consensus a forehead
temperature of 38.0° C (100.4 °F) or higher constitutes a fever.
Package Contents
This carton contains:
1 x Touch Forehead Thermometer
1 x Micro USB/USB charging cable
1 x User Instruction Manual
The LifeTemp Touch Forehead Thermometer
Thermometer Parts Description: The parts of this thermometer
are identified in Figure 1.
FIGURE 1.
PARTS OF THE LIFETEMP TOUCH FOREHEAD THERMOMETER
Model AI-TOU
LCD Display
The LifeTemp Touch LCD display is identified in Figure 2.
FIGURE 2. THE LIFETEMP TOUCH LCD DISPLAY.
Instructions for Use
1. Turn the thermometer on by pressing On/Off switch (see Fig 3.1).
The LCD screen will illuminate with a blue backlight.
2. A beep sound will be heard and the backlight will turn off. The
screen will then flash
– – – –
°C. The unit is now ready for use. Place
the thermometer’s probe on the forehead (see Fig. 3.2). After
approximately 1 second the thermometer will beep and display the
temperature with a blue backlight.
If a consecutive reading is required then please wait for the backlight
to turn off and the
°C to flash. Repeat the above procedure as often
as required.
If a reading above 38°C is recorded then 6 consecutive beeps will be
heard.
3. Press the On/Off switch to turn the thermometer off (see Fig. 3.3).
Or the unit will switch off automatically after approximately 60
seconds.
3.23.1 3.3
FIGURE 3.
Recalling Readings from Memory
1. To enter memory mode, ensure the thermometer is Off.
2. Touch and release thermometer’s probe with your finger.
3. The last reading will now be displayed as 01 and followed with an
illuminated display. Touch and release the probe again to display
the next reading in a sequence from last reading to first reading (see
Fig.4).
4. The thermometer will turn-off after 12 seconds of idling.
5. The thermometer can recall 12 temperature readings.
01 36.8°C 02 36.6°C
FIGURE 4. RECALLING READINGS FROM MEMORY
Deleting Temperature Readings
Stored in Memory
1. Ensure the thermometer is Off.
2. Cover the thermometer’s probe for approximately 5 seconds. The
LCD will display “
”.
3. Uncover and press the thermometer’s probe again to delete all
readings in memory (see Fig. 5).
4. The thermometer will switch-off after 5 seconds of idling.
UncoverCover
5 Sec
FIGURE 5. DELETING READINGS STORED IN MEMORY
LCD
On/Off
USB Port
Probe
Unit Body
Forehead Thermometer
LifeTemp
®
Touch
To Next Page
Need help?
General
