Why does my AirStage J series show a MODEL INFORMATION ERROR?
The MODEL INFORMATION ERROR on your AirStage Air Conditioner typically indicates a problem with the power supply circuit, such as voltage drop or noise, or defective electrical parts in the indoor unit. This error usually resolves itself, and the model information stored in the EEPROM is recovered automatically.
Configures custom codes for indoor unit and remote controller pairing.
Details the procedure for setting custom codes to prevent indoor unit mix-ups.
Explains how to set unique addresses for each indoor unit.
Outlines the procedures for performing test runs.
Describes test run execution using the outdoor unit's PC board.
Explains how to conduct test runs using remote controllers.
Explains functions and settings for various switches.
Details switch functions and settings for indoor units.
Details switch functions and settings for outdoor units.
Explains DIP switch functions for wired/simple remote controllers.
Details DIP switch functions for group remote controllers.
Explains DIP switch functions for external switch controllers.
Details the input/output signals and operational conditions.
Lists all input and output parts with their control ranges.
Explains compressor capacity and frequency control.
Describes how compressor capacity is controlled.
Details compressor frequency control and speed settings.
Lists and explains various protective functions.
Provides a comprehensive list of protective functions and their conditions.
Details fan control settings and operation modes.
Explains how to set fan speed via the remote controller.
Covers master control of operation modes and auto changeover.
Details control for Cool, Fan, Heat, and Dry modes.
Covers timer settings for remote controllers.
Explains timer functions for wireless remote controllers.
Details timer functions for wired remote controllers.
Troubleshooting for indoor unit operations and displays.
Describes normal LED indicators and flashing patterns.
Details abnormal LED indicators and corresponding error contents.
Troubleshooting for outdoor unit operations and displays.
Details abnormal LED indicators on the outdoor unit PCB.
General troubleshooting guidance with error codes.
Resolving indoor unit errors based on error codes.
Resolving outdoor unit errors based on error codes.
Calculates and details additional refrigerant charges based on pipe length.
Outlines essential precautions for pipe preparation and flare connections.
Provides precautions for R410A pipe installation and flare nuts.
Details precautions for servicing with new refrigerants and tools.
General| Brand | AirStage |
|---|---|
| Model | J series |
| Category | Air Conditioner |
| Language | English |
To Next Page
