To Next PageTo Next PageWhat to do if my AirStage UTY-RNKY Controller doesn’t operate at all?
If your AirStage Controller isn't operating, first, verify the power supply is working correctly. Then, inspect the fuse or circuit breaker. Ensure the main power switch is in the ON position. Finally, check if the controller is under centralized control.
Indicates procedures that might lead to death or serious injury if performed improperly.
Indicates procedures that might cause personal harm or property damage if performed improperly.
Diagram showing the remote controller with its cover opened, detailing various buttons and indicators.
Detailed illustration of the remote controller's display panel with numbered components.
Step-by-step guide for setting the current day and time on the remote controller.
Instructions on how to start and stop the air conditioner using the remote controller.
Guide to selecting different operating modes (AUTO, COOL, DRY, FAN, HEAT) for the air conditioner.
Instructions for activating and using the energy-saving economy mode on the remote controller.
Guide for setting the timer to turn the air conditioner on or off automatically.
Instructions on how to cancel an active timer setting.
Detailed procedure for setting up the weekly timer function for automated operation.
How to select specific days of the week for timer programming.
Setting the ON and OFF times for the weekly timer operations.
Setting an independent OFF timer, separate from the ON/OFF timer.
Steps to remove or cancel a set weekly timer operation.
Instructions for setting a day off to temporarily disable timer operations.
Guide to configuring the temperature set back timer for automatic temperature adjustments.
Steps for activating and deactivating the temperature set back timer.
Priority settings for cooling/heating modes in multi-unit systems.
Explanation of restricted settings indicated by symbols on the remote controller.
Interpreting various status indicators and blinking lights on the remote controller.
Information on indicators displayed during defrosting and oil recovery cycles.
Overview of the weekly timer function for setting daily operating schedules.
How to temporarily disable timer operations for a specific day.
Using the timer to adjust set temperatures during scheduled operation times.
General| Brand | AirStage |
|---|---|
| Model | UTY-RNKY |
| Category | Controller |
| Language | English |
