INTRODUCTION
Mold (See page C-8)
There are mold and mold spores throughout the indoor and outdoor environment.
There is no practical way to eliminate all mold and mold spores in the indoor
environment; the way to control indoor mold growth is to control moisture.
Towing and Weight Distribution (See section B. pages 1-11)
Weight distribution is an important factor when loading your travel trailer. A
recreational vehicle with the cargo distributed properly will result in efficient,
trouble-free towing. Be sure to follow the instructions in this manual.
Lug Nut Torquing (See page D-15)
Being sure wheel mounting nuts (lug nuts) on trailer wheels are tight and
properly torqued is an important responsibility that trailer owners and users
need to be familiar with and practice. Inadequate and/or inappropriate wheel
nut torque (tightness) is a major reason that lug nuts loosen in service. Loose
lug nuts can rapidly lead to a wheel separation with potentially serious safety
consequences. Be sure to follow the instructions in this manual.
See torque pattern on page D-16 for tightening sequence and follow torque
specifications in the specification chart in the specification section of this
manual.
Appliances and Equipment (See Section H)
The appliances (stove, refrigerator, etc.) and equipment (hot water heater,
furnace, etc.) typically operate on LP gas. LP gas is flammable and is contained
under high pressure. Improper use may result in a fire and/or explosion. Be
sure to follow all instructions and warnings in this manual as well as the specific
owners’ manuals of the appliances and equipment.
Tire Safety (See page D-12)
Properly maintained tires improve the steering, stopping, traction, and load-
carrying capability of your vehicle. Underinflated tires and overloaded vehicles
are a major cause of tire failure. Be sure to read the Tire Safety Manual
Addendum included with your owner’s packet.
To Next Page
Loading...
