ELECTRICAL
G - 16
G
H - 1
Important: If handle B does not move to TRIP position when test button
is pressed, the GFCI breaker protection is not complete. If this happens,
replace.
GFCI Receptacle
To properly test GFCI receptacles in your home:
Push the “Reset” button located on the GFCI receptacle, first to
assure normal GFCI operation.
Plug a night light (with an “ON/OFF” switch) or other product
(such as a lamp) into the GFCI receptacle and turn the product
“ON.”
Push the “Test” button located on the GFCI receptacle. The night light or other
product should go “OFF.”
Push the “Reset” button, again. The light or other product should go “ON”
again.
If the light or other product remains “ON” when the “Test” button is pushed, the
GFCI is not working properly or has been incorrectly installed (miss wired). If
your GFCI is not working properly, call a qualified, certified electrician who can
assess the situation, rewire the GFCI if necessary or replace the device.
Record GFCI Breaker and receptacle tests in this chart.
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
2010
2011
2012
2013
2014
2015
To Next Page
Loading...
