Questions? Call Toll Free at 1-800-737-2112 Copyright © 2008 MAT Engine Technologies, LLC
Look inside for:
Page
Safety Definitions 1
Important Safety Information 2-3
Product Specifications 4
Parts & Features 4
Assembly 4-5
Operation 6-7
Routine Maintenance 7-8
Storage 8
Troubleshooting 9
Technical Service 9
Warranty 10-15
Español 16
06/25/2008 Printed in China A101290
Operator’s Manual
Gasoline Powered Blower
25 cc, 2 Cycle
IMPORTANT:
Thank you for purchasing this AirSTREAM® Blower.
Read and understand all warnings and instructions in this manual before operating this tool. Improper use of this tool can
cause severe injury or death. Keep this manual for future reference.
Record the following for future reference:
Serial #: ________________________
Date of Purchase: Attach a copy of your sales receipt.
Consumer Toll Free Number: 1-800-737-2112
KEEP THIS MANUAL FOR FUTURE REFERENCE
MODEL Nos. A-HB-25150
A-HB-25150 (C)
For Occasional Use Only
If you have a question or problem...
CALL TOLL FREE: 1-800-737-2112
This product contains one or more chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
WARNING
Safety Definitions
• Save all instructions
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury
or equipment/damage property.
DANGER
CAUTION
WARNING
The information listed below should be read and understood by the operator. We utilize the symbols below to allow the
reader to recognize important information about their safety.
Safety Alert Symbols:
Indicates Warning. Keep all by-standers at least 50 ft.
(15 m) away.
Read these instructions carefully. This equipment can throw small objects
at high speed causing personal injury.
Inspect area where used and remove
all foreign objects.
Always wear eye protection that meets or
exceeds the requirements of ANSI Z87.1.
Wear hearing protection.
Wear breathing protection.
Explosive material.
Wear safety footwear. Extremely hot surface. Do not touch
a hot muffler, gear box or cylinder,
you may get burned. These parts get
extremely hot from operation and
remain hot for a short time after the
unit is turned off.
Wear safety gloves.
Rotating impeller blades can cause
severe injury.
Safety Warning Symbols:
To Next Page
General