To Next PageTo Next Page
Need help?Do you have a question about the Airstream Cumberland EXPERT LA and is the answer not in the manual?
General| Brand | Airstream |
|---|---|
| Model | Cumberland EXPERT LA |
| Category | Controller |
| Language | English |
Important safety and operational guidelines for using the controller.
Explains the meaning of icons and symbols used in the manual.
Provides a general description of the EXPERT LA controller's capabilities and features.
Details the physical steps and recommendations for mounting the controller enclosure.
Guides on wiring the controller, including main wiring, alarms, sensors, and outputs.
Identifies and describes the function of all buttons, display elements, and LEDs on the controller's faceplate.
Explains how to navigate and modify parameters using the controller's interface buttons.
Describes the process for changing the user interface language displayed on the controller.
Details the status indicated by each LED on the controller's faceplate.
Guides on how to set the current time and date on the controller for accurate operation.
Outlines the controller's password protection levels, including entering, changing, and retrieving passwords.
Explains controller programs, selection, settings, and copying/pasting program configurations.
Specifies how to configure units for time, temperature, water, and static pressure.
Comprehensive guide to customizing controller settings for specific applications and enabling outputs.
Explains how to configure relative humidity compensation functions for heating, misting, and cool cells.
Instructions for enabling, activating, calibrating, and assigning probe inputs.
Describes the process of assigning On/Off relays to various controller outputs.
Allows setting different temperature set points and minimum ventilation levels for night periods.
Configuration for interrupting regular operations for cleaning, with options for heating and ventilation.
Enables simulating temperature changes to test controller performance.
Displays the current firmware version of the controller program.
Defines target room temperatures for day, night, clean mode, and outside conditions.
Configures pressure limits for controlling vent doors and tunnel doors based on static pressure.
Allows automatic adjustment of temperature set points over time using a 10-step curve.
Configuration for minimum ventilation cycles to manage humidity and oxygen levels.
Configures up to 12 fan stages for sequential ventilation based on temperature.
Controls two natural ventilation curtains based on temperature and timers.
Controls two tunnel doors based on static pressure or room temperature.
Controls two vent doors (inlets) based on temperature or static pressure.
Manages air inlets using 0-10V output, based on temperature and fan stage activation.
Controls the cool cell output for evaporative cooling based on temperature or time range.
Manages the misting output for cooling, based on temperature, timers, and humidity levels.
Sets the on and off temperatures for heating stages, including Hi/Lo fire options.
Defines 10 light programs with daily cycles based on animal age.
Describes how light intensity changes throughout the day within a program.
Explains the use of sudden increases in light intensity to stimulate animals.
Configures parameters for light programs including day, sunrise/sunset delays, intensity, and cycles.
Sets the light intensity threshold at which auxiliary relays for lights activate.
Configures clock outputs to start and stop based on specific times of day.
Configures clock outputs to start and run for a specified duration.
General settings for clock outputs, including mode, time, and run time parameters.
Uses heating outputs in timer mode to compensate for high humidity levels.
Disables misting and cool cell outputs when high humidity levels are detected.
Activates misting outputs in timer mode to compensate for low humidity levels.
Configures RH compensation parameters like set points, timer intervals, and shutoff conditions.
Displays a record of all alarm conditions that have occurred on the controller.
Lists and describes all possible alarm types, including temperature, pressure, and sensor defects.
Configures which alarm conditions activate the alarm relay and sets specific alarm limits and delays.
Provides a real-time overview of all sensor readings and output statuses.
Displays daily run times for feeders and heaters stored for up to 75 days.
Accesses historical data for ambient temperature, probes, humidity, static pressure, and animal counts.
Manages animal age progression and tracks counts of animals (mortality, culled, marketed).
Sets up recurring warning messages for maintenance or service activities.
Explains the function of the memory card for firmware upgrades, backups, and configuration transfers.
Details the steps to access the menu for transferring data to or from the memory card.
Guides on installing new controller configurations or saving existing ones to the memory card.
Instructions for updating the controller's firmware using files from the memory card.
Describes how to delete all files and data stored on the memory card.
A template to record relay assignments for various outputs across different programs.
A template for documenting probe assignments to different outputs for each program.
A worksheet to record all installation setup parameters for each program.
