Introduction
This manual is part of unit and must be kept properly in order to prepare for future use. The use of high reliability
component to ensure the quality of our products, through continuous investment to achieve technological and
continuous improvement of products.
If the SUPPLY CORD or warning labels are damaged, it must be replaced by the manufacture, its service
agent or similarly qualified person in order to avoid a hazard.
For safety and to achieve the highest levels of performance, always follow the warnings and cautions in this
manual when handling and operating the AIRSYS unit.
Danger. Emphasizes hazardous conditions that could cause personal injury or
death.
Warning. Indicates where the operator must proceed with caution to avoid
personal injury or damage to property.
Important. Indicates technical information critical for proper installation or
operation.
Table 1 lists symbols that may appear on the external packaging.
Table 1-1 Packaging Symbols
THIS SIDE UP
Shows the orientation of the unit.
NO HOOKS
Do not use hooks to lift the packed
unit.
FRAGILE
Handle with care.
KEEP AWAY FROM HEAT
The unit must be kept away from
heat sources.
PROTECT AGAINST RAIN:
The packaged unit must be stored
in a dry place.
To Next Page
Loading...
