11
4. Enter air dry mode
The brush air dry system will auto start after cleaning.
The rolling brush will rotate every three minutes to dry evenly and thoroughly.
The entire process will last for around two hours.
Note: Pressing the Mode Switch button can turn the Air dry function on/off during
charging.
Mode Switch Button
Cleaning the Dirty Water Tank
When the dirty water tank is full, the appliance will turn off automatically. The screen
will display the diirty water tank indiicator and the voice prompt will let you know the
tank needs to bbe emptied.
1. Press the water tank button to remove the dirty water tank.
2. Remove the float from the dirty water tank, and empty the dirty water.
It is recommended to clean the residual dirt found on the inner wall of the water
tank with small cleaning tools.
3. Pour out the dirty water.
Reinstall the water tank cover and insert the dirty water tank back into the main
body until it clicks into place.
Silent Mode
Press the self-cleaning button for 3 seconds to activate or deactivate the voice
prompt function.
Product Routine Cleaning
• For optimal performance and to prevent odors, always clean and dry the dirty water
tank, floater, filters, brush roller, and brush roller cover completely after each use.
To Next Page
Loading...
