12
ROUTINE CLEANING
Cleaning the vacuum cleaner body
1. Turn off the power before cleaning the appliance.
2. Clean the body with a soft cloth which could be dampenedwith clean water or a
Neutral detergent.
Attention: Don’t wet the internal components
1 2
1 2 3
Clean the HEPA Filter
Clean the HEPA filter under running water after each use. Make sure the HEPA dries
completely before reassembling.
1. Take out the filter support from the water tank cover.
2. Rinse it with running water
3. Install it back into the water tank after it is completely dry.
• Please make sure each part is installed correctly or the appliance may not work
properly.
• After maintenance, place the appliance on the storage tray vertically.
Do not expose the appliance to direct sunlight. Store it indoors in a dry place.
To Next Page
Loading...
