The Airtok AP1002 is an air purifier designed to improve air quality in indoor environments. This manual provides comprehensive information on its operation, maintenance, and safety guidelines.
Function Description
The primary function of the Airtok AP1002 is to purify the air by removing various pollutants and odors. It achieves this through a multi-stage filtration system. The device draws in air through an air inlet, processes it through a filter, and then releases purified air through an air outlet. The purification process is designed to address dirty air conditions, with adjustable fan speeds to suit different needs.
Important Technical Specifications
- Model: AP1002
- Input Voltage: AC120V / 60Hz
- Rated Power: 60 W
- CADR (Clean Air Delivery Rate): 125 CFM / 215 m³/h
- Operating Conditions:
- Temperature: 14°F–104°F / -10°C~40°C
- Humidity: < 85% RH
- Noise Level: 25-50 dB
- Product Net Weight: 9.9 lb / 4.5 kg
- Product Size: 13.0 x 7.3 x 19.7 inches / 330 x 185 x 500 mm
Usage Features
The Airtok AP1002 offers several user-friendly features controlled via a top-mounted control panel:
- Power On/Off: A dedicated button allows for easy power control.
- Fan Speed Adjustment: Users can cycle through four fan speeds: low, medium, high, and sleep mode. This allows for customization based on the air quality and desired noise level.
- Timer Function: The device includes a timer that can be set for 1, 2, 4, or 8 hours. This feature allows for scheduled power-off in power-on state or scheduled power-on in standby mode, providing flexibility for users.
- Child Lock: To prevent accidental changes to settings, the air purifier features a child lock. This function can be activated or deactivated by pressing and holding the child lock button for 3 seconds. An indicator light confirms the status of the child lock.
- Filter Replacement Indicator: The device is equipped with a filter alarm light that flashes to remind users when it's time to replace the filter. This ensures continuous optimal performance.
Maintenance Features
Proper maintenance is crucial for the longevity and efficiency of the Airtok AP1002.
- Filter Replacement: The filter is a key component and has an estimated life of 1,500 hours under normal service conditions. The filter alarm light will flash after approximately 1,350 hours (90% of rated lifecycle) to prompt replacement. To replace the filter:
- Remove the cover from the host unit by fastening the upper left and right corners and pulling it out from both sides.
- Lift the lid.
- Remove the old filter.
- Remove the new filter from its bag.
- Insert the new filter into the host, ensuring the bottom buckle is aligned with the groove. Misalignment will prevent the machine from operating.
- Reinstall the cover by first placing the lug at the bottom into the groove, then pushing the bottom of the lid into place, and finally pressing the upper left and right corners until a click is heard.
- After replacing the filter, press and hold the filter replacement button for 3 seconds to reset the indicator light. A beep will confirm the reset.
- Cleaning: The manual advises disconnecting the power supply by unplugging the power cable before replacing filters and before cleaning the unit. This ensures user safety.
- Troubleshooting: The manual includes a troubleshooting section to address common issues such as the air purifier not turning on (check power, plug connection, rear cover installation), dull sound or small wind (check if filter bag is removed, air outlet covered), and peculiar smell at the air outlet (check for external odor sources, filter replacement time). A slight peculiar smell during initial use is noted as normal.
Safety Instructions
The manual emphasizes several important safety precautions:
- Always plug the air purifier into a live 120V AC outlet.
- Turn off and unplug the unit when not in use.
- Disconnect power before replacing filters or cleaning.
- Do not use unrecommended attachments or filters.
- Do not use the air purifier outdoors.
- Do not attempt to remove any part of the unit except the filters.
- Do not attempt to repair the air purifier.
- Do not handle the machine with wet hands.
- Do not soak or splash water on the purifier.
- Do not operate near an open flame.
- Do not obstruct the air inlet or outlet.
- Save the instructions for future reference.
Warranty and Support
The product comes with a 12-month warranty from the original purchase date, with an option to extend for an additional year by contacting customer support. Airtok also encourages users to become members for updates on filters and new products. Customer support is available Mon-Fri, 9:00 am-5:00 pm PST/PDT via support@airtok.com, live chat, or their website (www.airtok.com).
Need help?
General
To Next Page