MANOS
Universal Tablet Holder
QUICK START GUIDE
Note: Do not remove side knobs as the springs will release. They are not user installable.
Screw Manos Mount onto any standard
mic stand thread and rotate so one arm
is up and the other is down.
Lightly loosen side knobs to release
adjustable mount arms. Squeeze open
the clamp on the lower arm and insert
the tablet.
Move the upper arm into place and
clamp the other side of the tablet.
Make sure the pivot feet and clamps are
firmly contacting the tablet. Tighten the
knobs to secure.
Adjust swivel mount base 360° for
optimal viewings.
Loosen pivot knob to adjust tilt.
To Next Page
Need help?
General