Airworks FFH2 - Getting to Know Your Heater; Operating Instructions

FFH2 Airworks Fan Forced
5
Be sure to plug into a 120V AC, 60Hz outlet.
Your heater is equipped with a 4-position control switch:
1. Set the control switch to for fast warm up of a room. Once the room is
comfortable, select
to reduce electrical consumption and to prevent the room
from becoming too warm
2. Pilot Light: This fan heater is equipped with a pilot light, which glows when the
heater is working.
Safety Features of the Heater:
1. Thermal Fuse: In the event that the unit reaches extremely high
temperatures, the heater’s fuse will shut off permanently. Should this occur,
bring the heater to a certified electrician to examine.
2. Thermal Cut-Off: In the event of overheating, the heater will automatically
shut off. To reset, turn off or unplug the heater to allow for cooling for about 5
minutes. The most common cause of overheating is collection of dust.
GETTING
TO
KNOW
YOUR
HEATER
OPERATING INSTRUCTIONS
2
3
1
Parts of the
heater
1. Safety grille
2. Pilot light
3. Power control
Symbols
Power Off
Fan Only
LO heat setting
HI heat setting