Airworks Twister T60 User Manual

- A division of Airworks Compressors and Mobile Equipment Corp -
TWISTER
T40/T60
WELDER/GENERATOR
INSTALLATION
&
OPERATION MANUAL
REVISED 09/18
Unit Serial Number __________________________
Engine SN _________________________
Compressor SN ____________________
Control Box SN _____________________

Airworks Twister T60 Specifications

General

Brand	Airworks
Model	Twister T60
Category	Air Compressor
Language	English

Summary

Basic Twister Installation and Operation

Installation Notes

Notes regarding the installation of the Twister unit, including fuel pump and airflow.

Safety Precautions

Observe the Following General Safety Rules

General safety rules to follow before operating the air compressor equipment.

When operating the compressor

Specific safety guidelines for operating the compressor unit.

Routine Maintenance

Maintenance Schedule

Outlines the recommended maintenance schedule based on operating hours.

Twister Starting Procedure

Twister Shutdown Procedure

Steps for safely shutting down the Twister diesel engine and compressor.

Coolant Fill Instructions – For Use with Cold Weather Kit

NEVER OPEN THE COOLING SYSTEM WHILE HOT!

Pressure Regulation and Engine Speed Control

Adjusting the System

Guidance on adjusting system parameters like engine RPM and pressure.

Trouble Shooting the System

Compressor does not produce adequate air

Troubleshooting steps for a common issue of insufficient air output.

Frequent over-temperature shut downs

Diagnosing and resolving frequent unit shutdowns due to overheating.

Symptom: Engine stalls when compressor starts

Symptom: Low air pressure

Troubleshooting for low air pressure issues.

Symptom: Excessive oil in the air produced

Symptom: Oil blows out of compressor air filter on shut down

Symptom: Engine Smoking Lack of Power

Symptom: Engine runs okay at low speed/air pressure but smoke at high speed/air pressure

Safety Information

CAUTION: HOT

WARNING: HIGH PRESSURE SYSTEM

Operating Safety

CAUTION: Risk of severe burn.

CAUTION: Moving parts can cause injury.

CAUTION: Electricity can cause injury or death.

Electrical safety warnings and precautions to prevent shock or electrocution.

Engine Safety

Welding Safety

Comprehensive safety guidelines specific to welding operations.

DANGER: Explosion hazard.

Hazards related to welding sparks, spatter, and flammable materials.

WARNING: Fire and burn hazard.

WARNING: Welding arc hazard.

Storage and Maintenance Safety

DANGER: Corrosive material.

Operation

Before Starting

Operating the generator

Operation as a welder

Operation as a generator