EasyManua.ls Logo

AIS AutoChlor Classic Series - User Manual

AIS AutoChlor Classic Series
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
RESIDENTIAL SALT WATER CHLORINE GENERATOR
Classic Series
INSTRUCTION MANUAL
This manual is for:
CLASSIC RP MODEL RANGE
FEATURING REVERSE POLARITY TECHNOLOGY
RP-15, RP-20, RP-25, RP-36, RP-50, RP-64, RP-80
CLASSIC LS MODEL RANGE
(RP20-3500ppm, RP25-3500ppm, RP35-3500ppm)
MIDI RANGE
(RP-100, RP-150)
Includes:
TIME CLOCK MODELS (battery backup optional)
POOL LIGHT MODELS (where fi tted)

Table of Contents

Questions and Answers

  • C
    Caitlin BeltranAug 13, 2025
    Why is my AIS Water Filtration System chlorine generator not producing enough chlorine?
    • K
      Kaitlyn TurnerAug 13, 2025
      If your AIS Water Filtration System's chlorine generator isn't producing enough chlorine, there are several potential causes. First, the chlorine production level might be set too low; try adjusting the control knob clockwise to increase production. Second, the generator may not be running for a sufficient amount of time; increase the operation running time. A calcified electrode can also reduce chlorine output, so you should clean the electrode. Finally, incorrect water chemistry can impact chlorine generation, so ensure your water chemistry is properly balanced.
  • K
    kimtylerAug 16, 2025
    What to do if the low salinity light is on or flashing on my AIS Water Filtration System?
    • D
      Deanna CooperAug 17, 2025
      If the low salinity light is flashing on your AIS Water Filtration System, it typically indicates that the water salinity is too low. Have the salinity level tested by a pool professional and increase it if necessary. Another possible cause is a calcified electrode, which requires cleaning. A faulty electrode may also be the reason, so have it tested and replaced if necessary.
  • P
    Patrick CisnerosAug 20, 2025
    Why are there no lights on my AIS Water Filtration System chlorine generator and the pump is not running?
    • D
      Danielle JonesAug 20, 2025
      If there are no lights on your AIS Water Filtration System's chlorine generator and the pump isn't running, the first thing to check is the power supply. Unplug the chlorine generator from the power and test the outlet with another working appliance to ensure there is power. Another possibility is that the time clock is in a designated off period, or the switch is in the OFF position; switch to BYPASS to circumvent TIMER or OFF functions.
  • S
    Sheryl MathewsAug 25, 2025
    What to do if Status Light (3) is flashing and the generator is beeping on my AIS Water Filtration System?
    • W
      william76Aug 25, 2025
      If Status Light (3) is flashing and the generator is beeping on your AIS Water Filtration System, it could be due to a few reasons. One possibility is that the pump isn't running, the filtration is blocked, or there's an air lock. A large air bubble in the electrode housing can trigger this alarm, so clean out the skimmer box, check and clear any blockages, and re-prime the pump. Another potential cause is that the electrode lead isn't properly plugged in; double-check that the electrode lead plug is securely connected to the electrode.
  • G
    gknightAug 28, 2025
    Why is the high salinity light on or flashing on my AIS Water Filtration System?
    • L
      Linda MarksAug 28, 2025
      If the high salinity light is on or flashing on your AIS Water Filtration System, it typically means the pool salinity is too high. Have the salinity level tested by a pool professional and decrease it if necessary. If the salinity level is within the correct range, the chlorine generator may be faulty. In this case, contact your dealer or AIS Water for assistance.
  • J
    Justin MacdonaldAug 31, 2025
    Why is the circuit breaker tripping on my AIS Water Filtration System?
    • J
      John SnyderAug 31, 2025
      If the circuit breaker is tripping for your AIS Water Filtration System, it could be due to several reasons. A mains power surge may be the cause; set the machine to off and push the circuit breaker. A fault with shorted electrodes could also be the problem; visually inspect the electrode and check for foreign or conductive surfaces. If found, remove and clean the cell. If neither of these resolves the issue, there may be a fault with the power supply, in which case you should contact your dealer or AIS Water.
  • J
    John AvilaSep 4, 2025
    Why is Status Light (3) on and the pump is running, but no other lights are on, on my AIS Water Filtration System?
    • H
      haleykyleSep 4, 2025
      If Status Light (3) is on and the pump is running, but no other lights are on, on your AIS Water Filtration System, it could mean that the chlorine generator production is turned off. To resolve this, adjust the control knob clockwise to increase production.
  • E
    ethompsonSep 8, 2025
    What causes white powdery material on the pool bottom with my AIS AutoChlor Classic?
    • J
      johnsonjamesSep 8, 2025
      If you notice a white powdery material on the bottom of your pool when using the AIS Water Filtration System, it's likely due to excessive water hardness. Test the water chemistry and adjust accordingly to resolve this issue.

Summary

Control Panel Components

High Salt Light

Indicator light for high salt levels.

Low Salt; Cell Off Light

Indicator for low salt or cell off status.

Power ON; Water Flow Light

Indicates power status and water flow.

Overload; Normal Operation Light

Shows overload or normal operation status.

Chlorine Controller

Adjusts chlorine output level.

Chlorine Output Indicator

Visual display of chlorine output percentage.

Circuit Breaker

Protects against overloads; press to reset.

Time Clock (Timer Models)

Controls unit operation times for timer models.

Time Clock Bypass (Timer Models)

Bypasses timer functions for timer models.

System Introduction and Salt Addition

Special Note on Pool Maintenance

Chlorinator produces chlorine, does not maintain water balance.

Addition of Salt

Guide to adding salt for optimal performance.

Salt Usage and Water Balance

Special Note on Salt Usage

Salt is converted to chlorine and replenished by loss.

Water Balance Guidelines

Recommended chemical levels for pool water.

Chlorine Notes and Climate Impact

Special Note on Chlorine Supplementation

Manual chlorine addition for zero chlorine situations.

Chlorine Production in Various Climates

Guideline for chlorine production based on climate.

Fitting the Chlorinator Cell Housing

Installing the Power Supply Unit

Power Supply Functions and Features

Circuit Breaker Operation

Function and reset procedure for the circuit breaker.

On;Off Switch (Non-Timer Models)

Manual switch to turn chlorinator on/off.

Pump Output Socket

Socket for connecting the pool pump.

Warning Indicator Lights Overview

Indicator Light Details and RP Model Notes

Red Light Status and Operation

Interpreting red light for overload, power, and water flow.

RP Model Specific Indicator Notes

Notes on indicator lights for RP models.

Chlorine Control and Time Clock

Chlorine Controller Operation

Adjusting chlorine output with the controller.

Chlorine Output Indicator

Understanding the output indicator lights.

Time Clock Operations (Timer Models)

Setting and using the timer for equipment control.

Timer Special Notes and Bypass

Special Note on Timers

Recommendations for quartz time clocks.

Timer By-Pass Switch

Functions of the timer bypass switch.

Pool Lights and General Operation

Underwater Pool Lights (Optional)

Connecting and operating underwater pool lights.

General Chlorinator Operation

Steps for initial startup and operation.

RP Model Polarity Operation

Chlorinator Running Times

Maintenance: Electrode Inspection

Electrode Inspection Procedure

Procedure for inspecting the electrode for buildup.

Electrode Removal

Steps to remove the electrode for inspection.

Electrode Cleaning and Reassembly

Electrode Cleaning Method

Method for cleaning the electrode with acid.

Electrode Reassembly

Steps for reassembling the electrode.

Power Supply Repair;Maintenance

Instructions regarding power supply servicing.

Troubleshooting Guide: Common Issues

Troubleshooting Guide: Salinity & Circuit Breaker

Warranty and Contact Information

Warranty Coverage Details

Details on the product warranty coverage.

Contact Details for Support

Information for warranty and support inquiries.

AIS AutoChlor Classic Series Specifications

General IconGeneral
BrandAIS
ModelAutoChlor Classic Series
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals