AIS Matrix - Fabric Tiles Installation; Installing and Securing Fabric Tiles

12345
Matrix 2019
www.ais-inc.comwww.ais-inc.com
22
P-MXINSTRUCT01 Rev 07.29.2020
Fabric Tiles
Fabric Tile
Retainer
(used on 24” tall
tiles and higher)
Required hardware:
#8-32 x 5/16” Pan Head
Machine Screw
#RP-MXHS83214
Use philips drive #2
4 places
Fabric Tile Retainer
#RP-M2FTR-B
24H-40H = qty 1 each side
48H-64H = qty 3 each side
#8-32 x 5/16”
Pan Head Machine Screw
Philips Drive #2
GENTLY bend
into fabric tile
Use #1 Flat head
Screw Driver
IMPORTANT INSTRUCTIONS:
• Install fabric tiles by first inserting top
edge of tile under the tile retainer lip.
• MAKE SURE fabric tile is properly seated
in the bottom tile retainer.
• While holding fabric tile in place, GENTLY
bend retainer clip into the fabric to grip
the edge of the tile. Use #1 flat head
screw driver.
• DO NOT overbend and dimple tile edge.