To Next PageTo Next Page
Need help?Do you have a question about the Aisin YOSHI AWS E1J TWIN and is the answer not in the manual?
Details of the manufacturer, models, and product declaration of conformity.
Explanation of safety symbols and critical warnings for installation personnel.
Important information for specialized personnel regarding installation procedures and risks.
Essential guidelines and rules to follow before and during the unit installation.
List of components provided with the YOSHI AWS unit for installation.
List of additional parts that must be procured for the AWS unit installation.
Table detailing reduction factors for cooling capacity and pump flowrate based on mixture composition.
Details on pipe diameters, types, and connection points for water and refrigerant circuits.
Visual guides showing required clearances for maintenance and inspection of the AWS unit.
Diagram showing the layout of refrigerant piping and critical welding instructions.
Guide for selecting appropriate pipe diameters for AWS to GHP connections based on capacity.
Maximum permissible piping lengths and height differences for refrigerant lines.
Formula and method for calculating and charging the correct refrigerant gas quantity.
Explanation of the refrigerant and water flow during the unit's cooling operation.
Explanation of the refrigerant and water flow during the unit's heating operation.
Instructions and safety warnings for connecting the AWS unit's electrical wiring to the GHP unit.
Diagram of terminal blocks and a key for understanding electrical connections and cable types.
Description of the Control Panel and Buffer Tank for remote system management.
Explanation of the external probe's role in adjusting water flow temperature based on ambient conditions.
Important safety warnings related to settings, disconnections, and power supply for the control panel.
Details on safety features like pressure, flow, and antifreeze protection mechanisms.
How return water temperature affects capacity modulation and set points.
Procedure for fine-tuning the set point temperature offset for return water.
Layout diagram for fan-coil systems using a central storage tank.
Layout diagram featuring a hydraulic separator for system balancing.
Layout diagram for Air Handling Unit (AHU) systems employing a single pump.
Schematic showing the complete HVAC installation for the AWS E1J TWIN unit.
Diagram illustrating proportional distribution of consumption for E1J TWIN systems.
Diagram for variable flow rate AHU installation without a hydraulic separator.
Diagram for variable flow rate fan coil installation with a hydraulic separator.
Reference table for alarm codes, causes, and solutions displayed on the AWS control panel.
General