Need help?Do you have a question about the aiTerminal AIT001G and is the answer not in the manual?
General| Brand | aiTerminal |
|---|---|
| Model | AIT001G |
| Category | Indoor Furnishing |
| Language | English |
Details the physical components of the electric standing desk, including foot pads, legs, crossbars, control box, and keypad.
Lists the fasteners and tools required for assembly, such as various screws, rubber cushions, plastic pads, hex spanners, and cable ties.
Instructions for loosening and tightening the crossbar using M6*10 screws and a 4mm hex spanner.
Attaching the legs to the crossbar ends using 8 pcs M6*12 screws and a 4mm hex spanner.
Securing foot margins to the legs using 8 pcs M6*14 screws and a 4mm hex spanner.
Mounting brackets to each crossbar end using 4 pcs M6*12 screws and a 4mm hex spanner.
Placing rubber cushions and plastic pads on the side brackets and crossbar for protection.
Attaching the desk frame, control box, and keypad to the table top using various screws.
Plugging cables from the desk motors and keypad into the control box.
Procedure to activate the memory keypad and resolve common issues by lowering the desk.
Instructions for locking the handset (1 sec) and unlocking it (3 sec).
How to preset specific heights by pressing 'Up' and a number button (e.g., 'P1').
Switching measurement units between centimeters and inches via button combinations.
To Next Page