Need help?Do you have a question about the Aiwa AV-D35 and is the answer not in the manual?
General| Power Output | 35W per channel (RMS) |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Dimensions | 420 x 130 x 310 mm |
| Weight | 6.5 kg |
| Tuning range | FM, MW |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Type | Receiver |
| Inputs | Phono |
| Signal to noise ratio | 75dB (MM) |
| Channel separation | 45dB |
| Speaker load impedance | 8Ω to 16Ω |
| Total Harmonic Distortion (THD) | 0.5% |
| Total harmonic distortion | 0.5% |
To Next Page
