To Next Page
S
Stephanie TaylorAug 16, 2025
What to do if my Aiwa HV-DH10G has no power?
- JJoyce FlemingAug 16, 2025
If your Aiwa DVD VCR Combo has no power, make sure the AC power cord is securely plugged into the wall outlet.
What to do if my Aiwa HV-DH10G has no power?
If your Aiwa DVD VCR Combo has no power, make sure the AC power cord is securely plugged into the wall outlet.
Why is there no picture on my Aiwa DVD VCR Combo?
If there is no picture on your Aiwa DVD VCR Combo, try the following: * Ensure your TV is set to the correct video input mode to receive the unit's signal. * Press the TV/VIDEO button on the remote to select VCR mode (the TV indicator light should disappear). * Make sure your TV is turned on.
How to fix no sound on Aiwa DVD VCR Combo?
If you're experiencing no sound with your Aiwa DVD VCR Combo, consider these potential solutions: * Ensure the equipment connected with the audio cable is set to receive the unit’s signal output. * Check that the audio cables are securely connected. * Verify that the equipment connected to the audio cable is powered on. * Confirm that the audio output options are correctly set (refer to page 28), then power cycle the unit.
Why is my Aiwa DVD VCR Combo remote control not working?
If the remote control for your Aiwa DVD VCR Combo isn't working correctly: * Ensure you're pointing the remote at the unit's remote sensor. * Make sure you're within 7 meters of the unit. * Remove any obstacles between the remote and the unit. * Replace the batteries with new ones. * When using a VCR, first press the VIDEO button. When using a DVD, first press the DVD button.
What to do if my Aiwa HV-DH10G DVD VCR Combo does not start playback?
If your Aiwa DVD VCR Combo isn't starting playback, check the following: * Insert a disc or tape, ensuring the disc or tape indicator is lit. * Make sure you're using a playable disc, verifying the disc type and regional code. * Place the disc with the playback side down. * Ensure the disc is placed correctly within the guide on the disc tray. * Clean the disc if it's dirty. * Cancel the Rating function or change the rating level if it is set.
Why won't my Aiwa HV-DH10G DVD VCR Combo work even though the power is on?
If your Aiwa DVD VCR Combo has power but isn't working, make sure a disc or tape is inserted and that the disc or tape indicator in the display window is lit.
How to improve poor playback picture on Aiwa DVD VCR Combo?
If the playback picture quality is poor on your Aiwa DVD VCR Combo: * Clean the disc. * Clean the video heads. * If using a rental tape or one recorded on another VCR, use CH/TRACKING i+/k– for manual tracking adjustment during playback.
Why is timer recording not working on my Aiwa DVD VCR Combo?
If timer recording isn't working on your Aiwa DVD VCR Combo, it might be due to the following: * The clock in the unit is not set to the correct time. Set the clock to the correct time. * The timer has been programmed incorrectly. Reprogram the timer.
What to do if camcorder image via A/V input is not shown on Aiwa HV-DH10G DVD VCR Combo?
If the camcorder image via A/V input to the unit is not showing on the TV screen, press the INPUT SELECT button to select input channel AV3.
Why does the indicator light appear on my Aiwa HV-DH10G DVD VCR Combo when it's turned on?
The indicator light appearing while the unit is turned on is normal. It indicates that the Aiwa DVD VCR Combo is in TIMER mode.
General| Type | DVD VCR Combo |
|---|---|
| Brand | Aiwa |
| Model | HV-DH10G |
| Video Format | NTSC |
| Recording Formats | VHS |
| Remote Control | Yes |
| DVD Type | DVD player |
| VHS Recording Speed | SP, LP, EP |
| DVD Player | Yes |
| VCR Player | Yes |
| Region Code | 1 |
| TV System | NTSC |
| Output Resolution | 480i |
| Power Supply | AC 120V, 60Hz |
| Playback Formats | VHS |
| Connectors | Composite Video |
