Aiwa NSX-A222 User Manual

RADIO RECEPTION
7 Press TUNER BAND repeatedly to select the
desired band.
es > MW — LW
When TUNER BAND is pressed while the power is off, the
power is turned on directly.
To select a band with the remote control
Press BAND while pressing SHIFT.
2 Press << DOWN or ®» UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, “TUNE” is displayed for 2 seconds.
During FM stereo reception, {((@1)) is displayed.
(ta) =TUNE
T-BASS ROCK POP|CLASSIC 1
3
10 enetisn
To search for a station quickly (Auto Search)
- Keep << DOWN or > UP pressed until the frequency starts
to change rapidly. After tuning in to a station, the search stops.
To stop the Auto Search manually, press << DOWN or > UP.
¢ The Auto Search may not stop at stations with very weak signals.
When an FM stereo broadcast contains noise
Press MONO TUNER while pressing SHIFT on the remote control
so that “MONO” appears on the display.
Noise is reduced, although reception is monaural.
To restore stereo reception, repeat the above so that “MONO”
disappears.

Aiwa NSX-A222 Specifications

General

Brand	Aiwa
Model	NSX-A222
Category	Stereo Receiver
Language	English