EasyManua.ls Logo

Aiwa RM-P30 - Safety and Precautions; Handling, Placement, and Storage; Power Supply Options; Battery Usage and Care

Aiwa RM-P30
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Precautions
Power sources
Use on batteries or AC house current, as specified
in the Operating Instructions and marked on the
unit.
On placement
. Do not use the unit in places which are extremely
hot, cold, dusty or humid. In particular, do not
keep the unit:
in a high humidity area such as a bathroom
near a heater
. in an area exposed to direct sunlight (e. g.,
inside a parked car, please be careful because
it may become extremely hot)
Place the unit on a flat, even surface.
For safety
Take care that objects or liquids do not get inside
the unit.
When not in use
Disconnect the AC adaptor and remove all the
batteries if the unit will not be used for a long period
of time. When the cord is plugged in, a small
amount of current continues to flow to the unit even
when the unit is not being used.
Open the lid of the battery compartment on the rear
and insert four R6P (size AA) batteries, not
supplied, with the ~ and O marks correctly aligned.
Then close the lid.
. Before using on batteries, disconnect the AC
adaptor from the DC 6V jack. Battery power is cut
off automatically when the AC adaptor is
connected.
The batteries need to be replaced when:
The OPE/BATT indicator becomes dim, the tape
speed slows down, volume decreases, or sound is
distorted during operation.
Notes on batteries
Do not mix different types of batteries or old
batteries with new ones.
Never recharge the batteries, apply heat to them
or take them apart.
Remove dead batteries.
If liquid leaks from the batteries, wipe thoroughly to
remove.
2 ENGLISH

Other manuals for Aiwa RM-P30

Related product manuals