Device name, can be edited
Selection of a virtual room that the device is
Adjusts the brightness of the logo light
Assignment of devices for the extender
Jeweller Signal Strength Test
Signal strength test between the extender and the
Allows the user to disconnect the device without
removing it from the system.
Two options are available:
Note that the system will ignore only the disabled
device. Devices connected via ReX will continue
Disconnecting the extender from the hub and
— the device will not execute system
commands or participate in automation
scenarios, and the system will ignore device
alarms and other noti�cations
— the system will ignore only
noti�cations about the triggering of the device
Learn more about temporary
To Next Page
Loading...
Need help?
General