To Next PageTo Next Page
Need help?Do you have a question about the AJAX ReX and is the answer not in the manual?
General| Radio signal modulation | GFSK |
|---|---|
| Device Type | Extender |
| Battery Backup | Yes |
| Operating frequency | 868.0–868.6 MHz |
| Tamper protection | Yes |
Overview of ReX physical components: logo, SmartBracket, power connector, QR-code, tamper, and power buttons.
Steps and prerequisites required before initiating the ReX to hub connection process.
Step-by-step guide for establishing a connection between the ReX and the hub.
Instructions on how to assign compatible devices to operate via the ReX extender.
Process for assigning devices directly to the hub using ReX settings.
Details on ReX device states like signal strength, connection, battery charge, lid, external power, and firmware.
Explanation of ReX settings like name, room, LED brightness, pairing, signal strength test, and temporary deactivation.
Explanation of the LED indicator's behavior for different events like connection and power status.
Guidance on choosing the optimal location for ReX installation based on distance and obstacles.
Step-by-step instructions for physically mounting the ReX using the SmartBracket panel.
