Akai ACAD100N

25
ACAD100N
Button Function
Brightness TFT Panel brightness control
AV1 Rear CAM / Other
Rear Gear Enable/Disable
Rear CAM: set AV1 as rear cam, Other:
set AV1 as AV IN.
When entering the AV-IN mode, AV-IN 1 mode is de-
faulted after you enable the rear camera, or you should
make a choice between AV-IN 1 and AV-IN 2 when
OTHER is selected, or AV-IN 2 mode is defaulted after
you disable the rear camera.
Menu page 2
Button Function
DUAL Dual Mode Control
KEY Key Control
Date & Time control9.3
Tap DATE & TIME button from setting menu screen.
12/24 Hour Mode
Tap the 12/24 Hour Mode button to change
time mode to 24 hours, tap it again to
12 hours.
RDS & Radio control9.4
Tap RDS & RADIO button from setting menu screen.
Tap menu page buttons from RDS & RADIO menu
1 screen. Various Radio options can be set.
Menu page 1
Menu page 2
Menu page 3
Choose location where you are using Radio to set
frequency configuration.