Clock, Calendar and Alarm settings
To set up the clock, calendar and alarm settings, follow these steps:
Clock and calendar
Using the directional arrows highlight the “Clock” icon
Press the “Enter” button or wait for 3 seconds, it will enter into clock/calendar interface.
Press the “Setup” button on the remote control. You will then be given the following list of
possible settings:
OSD Language: Select the on screen display language. Select between: English, French,
German, Netherlands or Spanish
Date & Time: Press the “Enter” button on the remote and using the directional arrows
set the date (YY-MM-DD), Time and Time mode (12 hours / 24 hours).
Alarm
Alarm: Press the “Enter” button and using the directional arrows
set the alarm:
Repeat: Select alarm Disable / One Day / Every Day / Weekday / Weekend.
Time Settings: Set the time for the alarm.
Sound: Select your favorite alarm sound.
Auto power
Auto Power: Press the “Enter” button and using the directional arrows
set the auto
power on/off:
Repeat: Select auto power on/off Disable / One Day / Every Day / Weekday / Weekend
Power on time: Set the time when you want the unit to automatically power on.
Power off time: Set the time when you want the unit to automatically power off.
Calendar display
Calendar Display: Select the calendar display mode. Select between: slide, with single, with
clock.
Contrast: Adjust the display contrast.
Brightness: Adjust the display brightness.
Colour: Adjust display colour.
*Note: The frame will enter into the Calendar interface when the cursor stays on the image/video
interface for longer than 7 minutes.
14
To Next Page
Loading...