EasyManua.ls Logo

Akai AK-DW15P

Akai AK-DW15P
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
4
General Safety Instructions (Cont.)
Inserting/removing the plug: Before you insert or remove the plug, make sure
the appliance is switched off and the power is switched off at the electrical outlet.
Remove by grasping the plug, do not pull on the cord.
CAUTION! To reduce the risk of electric shock, do not immerse the unit, cord or plug
in water or other liquid. Do not expose it to rain or moisture.
RCD: Unless your home is already fitted with a residual current device (safety
switch), we recommend installing an RCD with a rated residual operating current
not exceeding 30mA to provide additional safety protection when using electrical
appliances. See your electrician for professional advice.
Installation
DANGER! Under certain conditions, hydrogen gas may be produced in a hot-water
system that has not been used for two weeks or more. Hydrogen gas is explosive!
If the hot-water system has not been used for such a period of time, before using
the dishwasher, turn on all hot-water taps and let the water flow from each of them
for several minutes. This will release any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during this time.
WARNING! Do not install the dishwasher yourself. Get it installed by an appropriately
qualified, licensed plumber or dishwasher installer only. Any electrical work required
should be carried out by a qualified, licensed electrician.
Power supply: During installation, the power supply cord must not be excessively or
dangerously bent or flattened. Other means for disconnection from the supply must
be incorporated in the fixed wiring with at least 3mm contact separation in all poles.
Water supply: Only use new hose sets when connecting this dishwasher to the water
supply; do not reuse old hoses.
Water pressure: The maximum permissible inlet water pressure is 1.0MPa. The
minimum permissible inlet water pressure is 0.04MPa.
WARNING! Do not install the appliance on or near any flammable or hot objects.
Ventilation: Ensure any ventilation openings in the base are not obstructed by carpet.
Proper installation: Install the dishwasher on an even, flat and stable ground. Do not
operate your dishwasher unless all enclosure panels are properly in place.
Safe disposal: When removing an old dishwasher from service or discarding it,
remove the door to the washing compartment.
Usage conditions and restrictions
Domestic use only: This appliance is intended for indoor household use only. It is not
suitable for industrial, commercial or trade use. Do not use it for anything other than
its intended purpose, and only use it as described in this manual.
Usage restriction: The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

Related product manuals