After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
12
Instructions
Control panel buttons (Fig. 4)
SY-DH80S5UW-001
SY-DH80S5UW-001
31 54 82 6 7 9
10
1 Program dial: Turn the program dial (knob) clockwise or anticlockwise to switch on
the appliance and select the required drying program (see page 16 for details of the
programs).
2 OFF [ O ] position: At the end of a program, turn the knob to the [ O ] position to
switch the machine off.
3 Time button: Press this button to extend the drying time. The “Time” program has a
default drying time of 20 minutes, which can be extended in 10 minute steps.
4 Child lock:
– To activate the child lock after the drying cycle has started, press and hold the Time
and Dry Level buttons for several seconds. When the child lock icon lights up
on the display, all buttons and knob operations are ineffective except for the off [ O ]
position. (In an emergency you can still power the machine off.)
– To cancel the child lock, press and hold the Time and Dry Level buttons for several
seconds.
– The function will be cancelled when you open the door or take out the filter drawer
during operation, or when the water container is full and needs to be emptied.
5 Dry Level button: If the program allows, use this button to select the drying level.
6 Anti-Crease button: Use this button to extend the duration of the anti-crease phase.
7 Mute Buzzer: Press and hold the Anti-Crease and Delay Start buttons for three to
five seconds to mute the buzzer.
8 Delay Start: Use this button to set the delay time (from 1 to 24 hours) of the start of a
drying program.
9 Start/Pause button: Press this button to start a drying program or to pause it.
10 Display screen: Shows the settings, time remaining, options, codes, etc. (see page 13).
To Next Page
Loading...