Akai AM-52

3
Making the right connections
Before connecting
ө Turn off all the components before connecting.
@ Connect the power cord last.
e
Make
sure
that
you
connect
the
white
PIN-plug
to
the
left
(white)
jack
апа
the
red
PIN-plug
to
the
right
(red)
jack.
ө
Connect
everything
securely.
Loose
connec-
tions
can
lead
to
distortion.
ө
To
prevent
damage
to
the
cords,
connect
and
disconnect
by
holding
the
plug
and
not
the
cord.
e
Make
sure
that
the
power
cords
and
the
connec-
tion
cords
do
not
get
tangled
with
each
other.
This
can
lead
to
distortion.
е
Make
sure
to
connect
the
output
cord
of
the
player
system
to
the
PHONO
jacks.
Do
not
con-
nect
any
other
component
(such
as
a
CD
player)
to
these
PHONO
jacks.
ө ifthe turntable you are using has a ground wire,
connect
it
to
the
ground
terminal
of
the
amplifier.
AUX jacks
This is an auxiliary jack. Connect such components
as avideo disc player or cassette deck for play-
back to these jacks.
For dubbing from the input source to one tape deck
(for AM-32) or two tape decks (for AM-52), we
recommend using the AUX jacks for the input
source.
TAPE 2 jacks (for AM-52)
Connect the LINE IN jacks of the 2nd cassette
deck (left and right) to the TAPE 2 REC jacks (Іей
and right) of the Akai amplifier, and connect the
LINE OUT jacks of the cassette deck (left and right)
to the TAPE 2 PLAY jacks (left and right) of the
Akai amplifier.
a=
„« . |0000 (Еі
CD Player
“Cc OUTPUT
(C
Turntable
Right channei
speaker system
SPEAKERS А —>
(CD)
AM loop
antenna
[TUNER |
(гл)
=
(F To AC outlet