Akai AM-M459

I. SPECIFICATIONS
1-1 MODEL AM-M459
Power output by DIN
(1kHz, 8 ohms) 40W + 40W
Music Power
Power bandwidth
S/N (THF-A)
PHONO MM
TUNER etc
Residual noise
Channel separation
5Hz ~ 80kHz/0.1%
Damping Factor
(1 kHz, 8 ohms)
Required speaker
impedance 8 ~ 16 ohms
Input sensitivity/
impedance
PHONO MM 2mV/47kohms
TUNER etc 150mV/47kohms
PHONO max input level
Frequency response
eigutiticesares +0.5dB (RIAA)
TUNER etc 10Hz ~ 50kHz
(-3dB, at source direct)
Tone control
Bassiics cis ethisecsetes +8.5dB at 100Hz
Treble ..................5 +8.5dB at 10kHz
DC power supply
(for PHONO) 12V (center—)
Power requirements 220V, 50Hz for Europe
except UK
240V, 50Hz for UK and
Austraria
110V/220V/220V/240V,
50Hz/60Hz
Convertible for other countries
Power consumption 145W for model
Dimensions 350 (W) X 136 (H) X 360 (D) mm
Standard accessories
Wireless remote control
Dry batteries (R6, DC1.5V)........ sadebesoesen x 2
* For improvement purposes, specifications and design are subject to change without notice.
1-2 MODEL AM-M659
Power output by DIN
(1kHz, 8 ohms)... .. 55W + 55W
Music Power
Power bandwidth
S/N (THF-A)
PHONO MM
TUNER etc
Residual noise
Channel separation
Damping Factor
(1 kHz, 8 ohms)
Required speaker
impedance 8 ~ 16 ohms
Input sensitivity/
impedance
PHONO MM 2mV/47kohms
TUNER etc 150m V/47kohms
Digital input level
(CD-OPTICAL) —22 dBm
PHONO max input level
Output level/impedance
150 mV/1 kohms
Frequency response
dena Conetehasutes +0.5dB (RIAA)
TUNER etc 10Hz ~ 50kHz
(-3dB, at source direct)
Tone control
+8.5dB at 100Hz
Treble ................000 +8.5dB at 10kHz
Power requirements 220V, 50Hz for Europe
except UK
240V, 50Hz for UK and
Austraria
110V/220V/220V/240V,
50Hz/60Hz
Convertible for other countries
Power consumption 185W for model
Dimensions 350 (W) X 137 (H) X 360 (D) mm
Standard accessories
Wireless remote control
Dry batteries (R6, DC1.5V)...
* For improvement purposes, specifications and design are subject to change without notice.
SERVICE MANUAL
w
pliers sae ahs: