To Next PageTo Next Page
Need help?Do you have a question about the Akai AM-M570 and is the answer not in the manual?
Power| power output | 40 W + 40 W |
|---|---|
| music power | 190 W |
| power band width | 5 Hz to 80 kHz |
| damping factor | 35 |
| power requirements | 220 V, 50 Hz for Europe except UK, 240 V, 50 Hz for UK and Australia, 110 V/120 V/220 V/240 V, 50/60 Hz convertible for other countries |
Audio Performance| S/N ratio (PHONO) | 72 dB |
|---|---|
| S/N ratio (TUNER) | 93 dB |
| residual noise | 0.5 mV |
| channel separation | 60 dB |
Input/Output Specifications| input sensitivity/impedance (PHONO) | 2 mV/47 kohms |
|---|---|
| input sensitivity/impedance (TUNER) | 150 mV/47 kohms |
| output level/impedance (TAPE) | 150 mV/1 kohm |
Frequency Response and Tone Control| frequency response (PHONO) | +0.5 dB |
|---|---|
| frequency response (TUNER) | 10 Hz to 50 kHz (-3 dB, at source direct) |
| bass tone control | +8.5 dB at 100 Hz |
| treble tone control | +8.5 dB at 10 kHz |
Weight and Dimensions| dimensions | 350 (W) x 138 (H) x 360 (D) mm (13.8 x 5.4 x 14.2 inches) |
|---|---|
| weight | 5.7 kg (12.5 lbs) |
Do not expose the appliance to rain or moisture to prevent fire or shock hazard.
Instructions for connecting speakers, including impedance, terminals, and connection methods.
Controls for turning the unit on/off, adjusting volume, and using the mute function.
Selecting playback sources and understanding input indicators; using Source Direct mode.
Steps for selecting a source, using Source Direct, and adjusting volume for playback.
Guide to selecting recording sources and preparing for recording.
Solutions for common problems like no power, no sound, or hum.
Detailed specifications including power output, sensitivity, frequency response, and dimensions.
