Akai AM-M570

specifications
Power output by DIN
(1 kHz, 8 ohms) ........ 40 W + 40 W
Music power ................ 190 W
Power band width ........ 5 Hz to 80 kHz/0.1%
S/N (IHF-A) ;
PHONO (MMM) .......... 72 dB
TUNER etc .............. 93 dB
Residual noise ............. 0.5 mV
Channel separation
CA KEIZ) > Lie sctenxubromnennacs 60 dB
Damping factor
(1 kHz, 8 ohms) ........ 35
Required speakers
impedance .............. 8 to 16 ohms
Input sensitivity/Imped-
ance
PHONO .............0.0.. 2 mV/47 kohms
TUNER, etc. ............ 150 mV/47 kohms
Phono max. input level
CU KEIZ) Sa ctdatvseticeactcs 100 mV
Output level/Impedance
TAPE veces toe 150 mV/1 kohm
Frequency response
PHONO: gecesore becca: +0.5 dB
TUNER, etc. ............ 10 Hz to 50 kHz (-3 dB, at source
direct)
Tone control
BASS seiisseiadcietieusacds +8.5 dB at 100 Hz
Treble .............cc.0. +8.5 dB at 10 kHz
Power requirements ..... 220 V, 50 Hz for Europe except
UK
240 V, 50 Hz for UK and Australia
110 V/120 V/220 V/240 V, 50/60
Hz convertible for other countries
Dimensions ................. 350 (W) x 138 (H) x 360 (D) mm
(13.8 x 5.4 x 14.2 inches)
WeigNt ...............:ccc eee 5.7 kg (12.5 Ibs)
Standard accessories
Wireless remote Control 2.0.0.0... 0... cece ccccccccceccenceecenseees x1
Dry battery (R6, DC 1.5. V) 0... eceeeeeeeeenees x2
For improvement purposes, specifications and design are
subject to change without notice.
Features
40W +40 W power output power DC construction amplifier.
The provided RC-S770 remote control unit can be used for
basic remote control operation of the following Akai com-
ponents: AT-M670/L tuner, AM-M570 amplifier, CD-M670
CD player, and HX-M670W/HX-M770W double cassette
decks. |
Audio mute system.
Motor driven volume control for remote control operation.
Source direct button. 7
Bass and treble tone control system.
PROCESSOR IN and OUT jacks for connection of optional
graphic equalizer.
Electronic muting and speaker protection system.
Balance control.