Akai AM-M570

Operation
Point the remote control unit at the REMOTE SENSOR win-
dows, and press the desired operation button.
If the remote control unit will only operate froma short distance
or anarrow angle, this indicates that the battery voltage is low.
Replace both batteries with new ones.
When replacing the batteries, clean the terminals of the
remote control and the batteries with a dry cloth.
How to load the batteries
1 Slide the battery compartment cover in the direction of the
arrow, and remove it.
Load the batteries according to the polarity guides on the
remote control unit.
3 Replace the battery compartment cover.
Cautionary notes
On the remote control unit
@ Avoid dropping the remote control unit or getting it wet.
@ Avoid exposing the remote control unit to direct sunlight or
strong light as this may cause malfunction.
@ Do not use rechargeable batteries.
@ |f you do not plan to use the remote control unit for along
period of time, remove the batteries.
@ To avoid malfunction of the remote control unit, keep it
away from appliances that generate electrical noise (TV
sets, micro-wave ovens, etc.).
On the dry batteries
@ Insert the batteries matching their polarity guides with the in
the remote control battery compartment.
@ Read the cautions printed on the batteries before inserting
them.
@ When replacing the batteries, replace both at the same
time. Do not mix an old battery with a new one.