EN - ENGLISH
• Bluetooth: Press the BT button on the remote control or repeatedly pressing the MODE
button on the soundbar control panel until BT is shown on the LED display. The LED display
will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device
you wish to connect is also in pairing mode and search for ASB-6SDW in its device list.
When the two devices are paired, the LED display on the soundbar will stop flashing and
remain constant. (The soundbar will now automatically re-pair with this device whenever it is
within range and has Bluetooth turned on.)
• USB media mode: The soundbar is compatible with USB flash drives of up to 64GB in size
and can play MP3 audio files directly. Simply insert a compatible drive into the USB port on
the back of the soundbar and the unit will automatically switch to USB mode and play the first
compatible track.
USB repeat mode (accessed via the remote control) enables single track repeat (press once)
and all track repeat (press twice).
The media player also has a memory function that will recall and continue from the last-
played point when a USB flash drive that has previously been used with the soundbar is
reinserted.
•HDMI(ARC): Connect a HDMI ARC compatible device to the HDMI ARC port on the
soundbar using a standard HDMI cable (not supplied),then press the MODE button on the
remote control or soundbar control panel repeatedly until ARC is displayed on the LED
display. Ensure HDMI ARC is selected as the TV’s audio output, then adjust the volume of
the soundbar using the Volume up and Volume down buttons on the remote control or
soundbar control panel.
• Optical in: Connect a compatible device to the OPTICAL port on the soundbar using a
digital optical cable (not supplied),then press the MODE button on the remote control or
soundbar control panel repeatedly until OPT is displayed on the LED display. Ensure Optical
SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar using the
Volume up and Volume down buttons on the remote control or soundbar control panel.
•FM: Select FM mode by pressing the MODE button on the remote control or soundbar. The
display will show an FM radio frequency. To perform a channel scan, press Play/Pause button
on the remote control or the soundbar. The soundbar will now scan through the FM frequency,
automatically saving any stations with a strong enough signal. You can now scroll back and
forward through the saved channels using the “previous” or “forward” buttons on the remote
control or the soundbar.
• Equalizer modes: The soundbar has 3 equalizer presets, tailored to complement various
styles of music. Press the EQ button on the remote to choose between Music (EQ1),
Movie(EQ2), News (EQ3).
To Next Page
Loading...
Need help?
General
