EN-ENGLISH
Operation Instructions
Installing the Product:
⚫ Plug the auxiliary power plug into an auxiliary power outlet.
⚫ The LED display shows the voltage of the battery of the car first for seconds and then shows "bt" to
indicate Bluetooth pairing mode is successful.
Pair with Bluetooth:
⚫ When LED display shows "bt"and the device will enter into Bluetooth pairing mode.
⚫ Enable Bluetooth on the device you want to pair.
⚫ Search and select "C80" from the list, then connect.
⚫ If asked enter the pairing code ‘0000’ or ‘1234’.
Connect to FM Radio | Auto-Scan mode
⚫ Press ‘AUTO’ button to start auto searching. The LED will show the FM frequency from the current
station to the next station in turns. Until it detects the best available station nearby, it will stay on this
detected station.
⚫ Tune your car radio to match the same frequency.
⚫ If the first detected station is not an ideal one, press ‘AUTO’ button again to auto-search the next
available FM frequency.
To Next Page
Loading...