SERVICE MANUAL
3
* The specifications are subject to change without the prior notice.
I. SPECIFICATIONS
INPUT (Input impedance : 500k ohms or more)
MIX OUT (Output impedance : 1k ohms or less)
HEAD1/EFFECT - HEAD4 (Output impedance : 1k ohms)
DC IN (9Volts)
LEVEL, HF DAMP, FEEDBACK, TIME COARSE/T IME, TIME FINE/HEAD GAP,
RATIO, MODE SELECT, LOOP LEVEL, LOOP TIME, FOOTSWITCH x 2
MODE LED x 3, EFFECT ON/OFF x 1, TEMPO x 1
Mode : NORMAL DE LAY, TAPE ECHO, LOOPING RECORDE R
Sampling Rate : 44.1kHz (2 9.4kHz in LOOP TIM : EXT END)
Sampling Resolution : 16 bit linear
Delay Time : NORMAL DE LAY = 23.8 sec., TAPE ECHO = 5.9 sec
Recording Time : LOOPING REC = 23.8 sec. (1 1.9 sec, in over-dub),
EXTEND = 35.6 sec. (17.8 sec. in over-dub)
140 (W) x 183.5 (D) x 65 (H) mm
Operator's Manual, AC-adaptor
To Next Page
Loading...
