Release Date: May 24,1999
Ref. #: MPC2kV172
mpc2000
V1.72 Operating System Upgrade
The system software for the MPC2000 has been upgraded to V1.72 to add support for the following improve-
ments and fixes:
Improvements:
[DISK]
1. The note duration may be altered when SMF data is loaded - fixed.
2. The time signature may be altered when SMF data is loaded - fixed.
3. The 64th track may be lost when all 64-track sequence is saved and loaded - fixed.
4. Garbage data is displayed when FLASH is selected while Flash-ROM is not installed - fixed.
5. “Can’t find file . . . [SKIP]” message appears when the program is loaded with sound that exceeds the
internal memory capacity - fixed.
[SONG]
After converting song to a sequence, the subsequent operation makes lock up if the convert destination
sequence has been used in a song - fixed.
[MAIN SCREEN]
1. Incorrect Tempo is sometimes shown - fixed.
2. Copy Parameters of Sequence revives some deleted sequences - fixed.
3. Recording sequence records pad action while in stop mode when Count is set to OFF - fixed.
4. SHIFT TIMING affects non-selected tracks - fixed.
[MIDI]
Note Repeat functions on a wrong MIDI channel when MIDI keyboard is used - fixed.
[SYNC]
1. It now waits for 50 seconds (used to be 1 second) for MIDI Clock to come in after Start Command is
received in MIDI Clock Slave mode.
2. In MIDI Clock Master mode, PLAY START may not start the slave units (depending on the unit) from the
beginning - fixed.
[PROGRAM]
Velocity setting in Velocity field of Velocity Modulation Window not reflected - fixed.
[TRIM]
Invalid loop length could be set sometimes - fixed.
The upgrade is available free of charge and can be obtained from Akai's Internet web site at
http://www.akai.com/akaipro or by contacting the Akai Sales Department directly at (817) 831-9203
Akai Musical Instrument Corp., 4710 Mercantile Drive, Ft. Worth, Texas 76137
Phone:(817) 831-9203 - Fax:(817) 222-1490
website:http://www.akai.com/akaipro
In Canada, contact Power Marketing, 3349 Bloor St. W. #24, Toronto, Ont, Canada M8X 1E9
phone:(416)234-1226 - fax:(416)234-0824
Need help?
General
