Need help?Do you have a question about the Akai MPC 2000XL and is the answer not in the manual?
General| Polyphony | 32 voices |
|---|---|
| Sampling Frequency | 44.1 kHz |
| Sampling Resolution | 16-bit |
| Sample Memory | 2MB standard, expandable to 32MB |
| Pads | 16 velocity-sensitive pads |
| Sequencer Resolution | 96 PPQN |
| Outputs | 8 individual outputs, stereo master output |
| Filter | Digital resonant filter |
| Display | 240 x 64 pixel LCD |
| Type | Sampler/Sequencer |
| Storage | 3.5" floppy disk |
| Effects | Optional effects board |
| Power Supply | AC 100-240V, 50/60 Hz |
| Maximum Sampling Time | 22.8 minutes (with 32 MB RAM) |
Detailed explanation of the front and rear panel controls, ports, and indicators.
Practical examples for recording drum performances, loops, and external MIDI sequences.
Fine-tuning individual MIDI events like notes, pitch bends, and control changes.
Guide to recording audio, selecting sources, modes, and adjusting sampling parameters.
Operations for selecting, renaming, deleting, copying, and converting sounds.
Using TRIM, LOOP, ZONE, and EDIT modes for detailed sound manipulation.
Details on assigning sounds to notes, auto-assignment, and pad/program modes.
Adjusting envelope, filter, and pitch parameters for individual notes within a program.
Setting volume and pan levels for each note/pad in the stereo output mix.
Configuring optional individual outputs and routing signals to effect processors.
Step-by-step guides for formatting floppy disks and SCSI drives.
Comprehensive instructions for saving/loading sequences, programs, sounds, and system files.
Formatting, saving, loading, and deleting data from the optional Flash ROM.
Setting up synchronization with external sequencers, MTRs using MIDI Clock, Time Code, and SMPTE.
To Next Page
