Akai MPC 2000XL User Manual

Chapter 7: Creating and Editing Programs
Page 115
Creating New Programs
Open the Program screen, select the Pgm: field and press OPEN WINDOW.
The Create New Program window will open if you press NEW[F3].
........................
CANCEL DO IT
New name:New name:NwePgm-B
MIDI program change: 2MIDI program change: 2
....................................................................................
........................................................................................
...........................
Create New ProgramCreate New Program
•
New name:
This sets the name of the program. Refer to “Renaming a Program” on how to enter char-
acters.
•
MIDI program change:
This sets the program number.
Copying Programs
Open the Program screen, select the Pgm: field and press OPEN WINDOW.
Press COPY [F5] to open the Copy Program window.
........................
CANCEL DO IT
Pgm= 1-NewPgm-APgm= 1-NewPgm-A
Pgm: 1-NewPgm-A
....................................................................................
........................................................................................
...........................
Copy ProgramCopy Program
COPY
Select the program that you want to copy the data to with the DATA wheel.
Press DO IT [F5] to copy the program data.
CAUTION: If there is data in the program you have selected as the destination, the data will
be erased when you press DO IT . Be careful when you are copying to a
program with a name other than “no program.”

Akai MPC 2000XL Specifications

General

Polyphony	32 voices
Sampling Frequency	44.1 kHz
Sampling Resolution	16-bit
Sample Memory	2MB standard, expandable to 32MB
Pads	16 velocity-sensitive pads
Sequencer Resolution	96 PPQN
Outputs	8 individual outputs, stereo master output
Filter	Digital resonant filter
Display	240 x 64 pixel LCD
Type	Sampler/Sequencer
Storage	3.5" floppy disk
Effects	Optional effects board
Power Supply	AC 100-240V, 50/60 Hz
Maximum Sampling Time	22.8 minutes (with 32 MB RAM)