Page 49
Chapter 3: Recording Sequences
Turning the Track ON or OFF
Press the TrMUTE [F3] key to turn the track on (YES) or off (NO) (the present condition is
displayed in the On: field). It can also be turned off by moving the cursor to this field and rotating
the DATA wheel.
.......................................................
..................................................................................................
Sq:01-Sequence01
TrMUTE SOLO Tr +
Now:001.01.00
STEP EDIT Tr -
™:120.0(MAS) Timing:1/16 Tsig: 4/ 4Tsig: 4/ 4
Count:OFF Loop: ONLoop: ON Bars: 0Bars: 0
Tr:01-Track-01 ON:YES Pgm:OFF
S:DRUM1:OFF New Pgm-A S:DRUM1:OFF New Pgm-A Velo%:100
Turning tracks on or off with the drum pads
From the MAIN SCREEN, press TRACK MUTE, the indicator lights and the following screen will
appear.
You can mute tracks by selecting one of the PAD BANKS: A (tracks 1-16), B (tracks 17-32), C
(tracks 33-48), D (tracks 49-64) and pressing the corresponding drum pad (pressing the pad again
turns the track back on).
The screen above shows all 16 tracks are turned on. When a track is turned off, the surrounding
blue field will disappear and the track name will be blue.
By holding the SOLO [F6] key down and pressing one of the drum pads, you can solo a track so
that only that track will be turned on.
Press SOLO [F6] again to cancel the solo mode.
Press the TRACK MUTE key again return to the Main Screen.
.......................................................
SOLO
Now:001.01.00
Press pads to Track ON/OFFPress pads to Track ON/OFF
BANK
A
Sq:01-Sequence01
Tr: (Unused) (Unused) (Unused) (Unused)
01-16 (Unused) (Unused) (Unused) (Unused)
(Unused) (Unused) (Unused) (Unused)
(Unused) (Unused) (Unused) (Unused)
.......................................................
SOLO
Now:001.01.00
Press pads to Track ON/OFFPress pads to Track ON/OFF
BANK
A
Sq:01-Sequence01
Tr: (Unused) (Unused) (Unused) (Unused)
01-16 (Unused) (Unused) (Unused) (Unused)
(Unused) (Unused) (Unused) (Unused)
(Unused) (Unused) (Unused) (Unused)
.......................................................
SOLO
Now:001.01.00
SOLO is activeSOLO is active
BANK
A
Sq:01-Sequence01
Tr: (Unused) (Unused) (Unused) (Unused)
01-16 (Unused) (Unused) (Unused) (Unused)
(Unused) (Unused) (Unused) (Unused)
(Unused) (Unused) (Unused) (Unused)
To Next Page
Loading...
Need help?
General
